|
| 產地 | |
| 品牌 | Bonderite S-FN 310A |
| 貨號 | Bonderite S-FN 310A |
| 用途 | |
| 英文名稱 | Bonderite S-FN 310A |
| 包裝規格 | 桶 |
| CAS編號 | |
| 別名 | Bonderite S-FN 310A |
| 純度 | 98% |
| 分子式 | Bonderite S-FN 310A |
| 是否進口 | 是 |
表面涂層表現出令人難以置信的耐磨性和操作壽命，優于傳統的PTFE。
BONDERITE® S-FN 310 is a powerful dry-film solution for longterm protection in a wide range of applications. BONDERITE®S-FN 310 is provided as a two-part system, that is mixed upon timeof application – slowly add component “A” to component “B” withcontinuous stirring for homogeneity.
The mixed BONDERITE® S-FN 310 solution is then sprayed onto thesurface in a thickness between 0.2 - 0.7 mils, or 4 – 6 passes withthe spray nozzle. The shelf life of the prepared mixture is24 hours.
Once the coating is applied, allow the surface to dry (5-10minutes) before loading into curing oven. The most popularcuring cycles and temperatures based on an average coating of0.0003 inch and are listed below:
60 minutes at 300°F (149°C)
10 minutes at 350°F (177°C)
8 minutes at 400°F (204°C)
4 minutes at 500°F (149°C)
Extended-term PTFE Protection
Multi-purpose Lubricating Solution
Excellent Adhesion on Multiple Surface Types (Wood, Steel,Aluminum, Copper Alloys, Rubber, Plastics)
BONDERITE® S-FN 310 helps provide a solution to the followingindustry & application problems:
Inefficient PTFE or Protective Coating Lifespan
Dry-Film Breakdown at High Temperatures
Package: 2 components ready for mixing (typical)
Color: light green (cured)
Density, as applied: 8.2 lb./gal
Density, “A” Component: 13.0 lb./gal
Density, “B” Component: 7.5 lb./gal
Consistency: Liquid
Service Temperature: 350°F (177°C)
Intermittent Temperature: 400°F (204°C)
Flash Point: 46°F (9°)
