|
| 貨號 | MultiTherm Hot Oil Filtration Systems |
| 品牌 | MultiTherm |
| 是否危險化學品 | 否 |
| 型號 | MultiTherm 660® Heat Transfer Fluid |
| 產品等級 | 合格品 |
| CAS編號 | |
| 純度 | 99% |
| 別名 | MultiTherm Hot Oil Filtration Systems |
| 密度 | 1.1g/cm3 |
| 產地/廠商 | MultiTherm Hot Oil Filtration Systems |
熱油會因熱裂解和氧化而降解。由于積碳，油降解的兩種副產品是油泥和焦炭。這些產品可能會聚集在您的整個系統中，但特別是在泵密封件和內部構件、閥門等中，會導致設備問題并可能最終導致系統故障。在沒有適當過濾的情況下持續累積污染物也可能對系統的加熱表面有害，從而降低傳熱效率。Hot Oils degrade by thermal cracking and oxidation. The two by-products of oil degration is sludge and coke due to carbon build-up. These products can collect throughout your system, but specifically in pump seals and internals, valves, etc. that result in equipment problems and possibly eventual system breakdown. The continuous contaminant build-up without proper filtration can also be detrimental to heating surfaces of your system, thereby reducing heat transfer efficiency.
The other important factor to consider is additional cost entailed from more rapid hot oil breakdown. This can include not only increased hot oil replacement, but higher labor man-hours due to increased maintenance and repair time and the cost of replacement parts such as seals, valves, rotors, and mag-drive canisters, thereby costs can quickly become considerable.
Filtration Benefits
- Extend Service Life of the Hot Oil
- Reduction of System Maintenance
- Reduction of Wear and Tear on Seals
- Improve Heat Transfer Efficiency
- Reduces Sludge Build-Up, Thereby Improving Viscosity of Fluid
- Design for Operation up to 650°F
- Swing-Bolt Lid for Easy Cartridge Change-Out
- Improved Flow-Rates/Throughput Due to Reduced Contamination Build-Up
Typical Unit Dimensions
- Width: 36 inches
- Diameter: 60 inches
- Height: 48 inches
Available Cartridge Sizes:
- 100-150 Micron
- 75 Micron
- 40 Micron
- 30 Micron
- 20 Micron
- 15 Micron
- 10 Micron
