Glyptal 1201A Insulating Alkyd Enamel
- 發布日期： 2021-07-06
- 更新日期： 2025-12-05
產品詳請
| 貨號 |
Glyptal 1201A
|
| 品牌 |
Glypta
|
| EINECS編號 |
Glyptal 1201a
|
| 是否危險化學品 |
否
|
| 型號 |
Glyptal 1201A
|
| CAS編號 |
|
| 別名 |
Glyptal 1201 a
|
| 密度 |
1000g/cm3
|
| 產地/廠商 |
美國
|
| 英文名稱 |
Glyptal 1201A
|
| 產品等級 |
優級品
|
| 純度 |
85%
|
| 分子式 |
Glyptal 1201 a
|
Glyptal®1201紅色MIL-E-22118規格絕緣搪瓷漆
Glyptal®1201 Red MIL-E-2218規格絕緣搪瓷漆不僅外觀漂亮，而且干燥后還具有出色的絕緣性能。它是在飛機電氣系統或需要耐用且絕緣的涂料層的任何其他地方使用的理想選擇。 Glyptal®1201紅色搪瓷絕緣漆為鮮紅色，因此易于識別。在例行維護過程中進行快速的目視檢查，以確保飛機的電氣系統始終正確絕緣。 Glyptal®紅色絕緣涂料有多種尺寸。
The Glyptal 1201A is a red, alkyd resin enamel paint that comes in a 12.75 oz can. The durable paint is ideal for coils, armatures and internal coatings of engines.
Glyptal 1201A Features:
-
Resin Type: Alkyd Enamel
-
Color: Red
-
Primary Color: Red
-
Finish: Low Gloss
-
Dry Time: 2h
-
Application Method: Spray
-
Container Size: 12.75oz
-
Resistance Properties: Water Resistant, Heat Resistant, Arc Resistant, Chemical Resistant
-
Quick-Drying (Yes/No): Yes
-
VOCs Content: 3.98g/L
-
Applications: Treatment of Coils And Armatures, Internal Coatings for Engines, General Plant Maintenance, Primer and Finish for Motor, Generator and Transfer Housings, Anti-Moisture Coating on Thermostat, Water Cooler, and Truck Control Parts, Sealer for Pipe and Stud
Glyptal 1201A Specifications:
-
Meets requirements of MIL-E-22118
-
Flexibility is far superior to competitive red sealers on both backed and air-dried films. 1201 can take rugged impact
-
Water Resistance is excellent
-
Prolonged aging doesn't crack 1201's film, leaves no place for destructive agents to get in
-
Fast drying 1201 is tack-free in about 30 minutes at room temperature, can be baked to a beautiful smooth finish
-
Heat Resistance. 1201 has got it, can withstand continuous 135°C temperature for months
-
Prolonged Heat. After 3700 hours at 35°C, there is no change in dielectric strength
-
Toughness. High-gloss paints have a tender film. 1201 has a low-gloss finish, designed for great resistance to abrasion
-
Adhesion. 1201 hangs on, stays where it's put-on metals, ceramic, porcelain, concrete, fibers and wood
-
Dielectric strength is rated at 1500 volts per mil, permits thinner coating than most competitive paints
-
Arc Resistance, even with air-dried films, is 480 seconds
