WS2 – Process SL39干膜潤滑
- 英文名稱:PTFE Solid Film Lubricant -- Everlube®6102G
- 貨號:Molybdenum Disulphide MoS...
- 發布日期: 2021-07-05
- 更新日期: 2025-12-05
產品詳請
| 貨號 |
Molybdenum Disulphide MoS2
|
| 品牌 |
WS2 – Process SL39
|
| EINECS編號 |
WS2 – Process SL39
|
| 是否危險化學品 |
|
| 型號 |
|
| CAS編號 |
|
| 別名 |
WS2 – Process SL39
|
| 密度 |
12g/cm3
|
| 產地/廠商 |
Everlube
|
| 英文名稱 |
PTFE Solid Film Lubricant -- Everlube®6102G
|
| 產品等級 |
優級品
|
| 純度 |
12%
|
| 分子式 |
WS2 – Process SL39
|
二硫化鎢干膜潤滑劑。
Originally developed for NASA, WS2’s unique, extensively modified lamellar composition of Tungsten Disulfide outperforms other dry coating lubricants. Our proprietary process, Process SL39, impinges a dry metallic coating without heat, binders or adhesives. The lubricant coating bonds instantly to any metal or resin substrate with a thickness of 0.5 microns (20 millionths).
Benefits & Capabilities
-
-
Solves problems such as friction, excessive wear, seizing, galling and fretting
-
-
Overcomes or reduces mechanical lubrication problems, improving performance and extending service life.
-
-
Eliminates and reduces costly maintenance problems that cause breakdowns and expensive downtime by stopping galling, fretting and friction caused by dissimilar metals and their different hardness factors.
-
-
Maintains the dimensional integrity of the substrate to within 0.5 microns with no build-up.
-
-
Withstands loads to 100,000 psi (or load capacity equal to a substrate) and operates in the temperature range of -460°F to 1200°F (-273°C to 650°C).
-
-
Offers lubricity throughout its texture.
-
-
Is inert, inorganic, non-toxic, non-distortive, non-corrosive and resistant to most fuels and solvents. It is compatible with and enhances the performance of all oils and greases.
-
-
Resists carbon buildup due to its extremely low coefficient of friction, less than half that of Graphite, Moly (MoS2) and Teflon.
-
Molecularly bonds to all materials and platings and can only be eliminated by removing the bonded substrate
|
Appearance
|
Blue
Silver Grey
|
|
Coefficient of Friction
|
0.06 to 0.15
|
|
Substrates
|
All ferrous or non-ferrous metal
Man-made solids & plastics
|
|
Cure Time
|
No cure time is required when applied at ambient temperature
|
|
Applications
|
Chucks, Collets and Tools
Circuit Breakers and Switches
Compressors and Rheostats
Cryogenic Pumps
Electrical Connectors
Engine and Drive Train Parts
High Vacuum Applications
Machine tools, Pins, Taps
Magnetic Heads
Pilot Valves, Chain Saws
Rubber Gaskets, “O” Ring Seals
Seamer Rolls
Slide Mechanisms
|