Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
- 英文名稱:Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
- 貨號:Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
- 發布日期: 2020-07-16
- 更新日期: 2025-12-05
產品詳請
| 貨號 |
Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
|
| 品牌 |
Halocarbon
|
| EINECS編號 |
Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
|
| 是否危險化學品 |
|
| 型號 |
Halocarbon 4.2 Oil
|
| CAS編號 |
|
| 別名 |
Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
|
| 密度 |
g/cm3
|
| 產地/廠商 |
Halocarbon
|
| 英文名稱 |
Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
|
| 產品等級 |
其他
|
| 純度 |
%
|
| 分子式 |
|
Halocarbon填充液是惰性的非反應性液體,專門設計用于計量一系列有害化學物質和氧化劑,包括鹵素,氧氣,*和其他特殊氣體應用。這些高質量的潤滑劑可在與甘油填充壓力表相同的溫度范圍內使用,某些等級的產品甚至可以承受更低,更*的溫度。Halocarbon Fill Fluids are inert, nonreactive fluids specifically engineered for metering an array of hazardous chemicals and oxidizing agents including halogens, oxygen, chlorine, and other specialty gas applications. These high-quality lubricants are usable in the same temperature ranges as glycerin-filled gauges and select grades can withstand even lower, more extreme temperatures. Halocarbon Fill Fluids facilitate high-performance liquid-filled gauges through excellent dampening for steady needles, extreme temperature tolerance, and reduced discoloration over long-term exposure to harsh environments. Halocarbon Fill Fluids are also critical for use in measurement instruments with diaphragm seals where a broad range of chemical compatibles is required, and their low viscosities and extreme temperature tolerances are essential. Unlike traditional silicone fluids, Halocarbon Fill Fluids have a higher vapor pressure and eliminate contamination in applications such as water treatment or vacuum service.